Hardware for aluminum turn&tilt window system
Details And Data Sheet
1. Suitable for 15/20 or 14/18 euro-slot extrusion profile.
2. Available for sash Width SK400-1600mm and height SG:530-2400mm.
3. Adutional lock point be proposed to offer if sash height over 1700mm.
4. Balance siay be proposed to offer if sasn width exceeds 1300mm.
5. Various handle for your choice, Hinges with 3D adjustable.
6. window scale (sash height/sash wiath) suggested to be 1.5:1
Summary Table Of Hardware Configuration Of Hardware For Aluminum Turn&Tilt Window
|
Series No. |
Parts Name |
|
1 |
Top Hinge |
|
2
|
370 Scissor |
|
600 Scissor |
|
|
3 |
Corner |
|
4 |
Keeper |
|
5 |
Drive Bar |
|
6 |
Anti Change Unit |
|
7 |
Tilt Part |
|
8 |
Tilt Stay |
|
9 |
Tilt Support |
|
10 |
Support Cushion |
|
11 |
Bottom Hinge |
|
12 |
Wind Stay |
|
13 |
Extended Comer |
|
14 |
Locking Block |
|
15 |
Balance Stay |
|
16 |
Handle |
For top side hole size of aluminium joint plate calculation formula:
For 370 scissor (370):
L1=W-342 W=sk(Sash width)
For 450 scissor(450):
L1=W-390 W=sk(Sash width)
For 600 scissor(600):
L1=W-447 W=sk(Sash width)
For handle side hole size of aluminum joint plate calculaiton formula:
L2=SG (Sash height)H/2-297 H=sash height L3=H/2-172 H=sash height
The above calculaiton is on the basis of 22mm folding size between sash and fram extrusion profile and only for your reference.
There are a variety of handles to choose from: square handles, curved handles, large round handles, small round handles
Hardware For Aluminum Turn&Tilt Window
Installation Process
Installation diagram of Hardware for aluminum turn&tilt window
Hardware installation sequence
Install according to Figure 1, Figure 2, Figure 3...One by one to install
Not afraid to contrast in on details
Good Material
A variety of materials available to meet your different needs, strong and durable with a long time.
Quality Clearance
Use testing equipment to test products, layer by layer screening, control quality.
Support For Customization
Can be customized to drawings and samples, we provide you with reasonable solutions.
Power Merchant
Use testing equipment to test products,layer by layer,screening,control quality.
Are you still worrying about these problems?
Are you still running to the hardware store?
Worry about not being able to buy the specifications, too many to carry.
Are you still bargaining for accessories?You don’t know how to choose the size, the workmanship is bad, You don’t know
Hardware for aluminum turn&tilt window
Why Do You Choose Us
Product name:Hardware for aluminum turn&tilt window
Product specifications: handle (arc handle, new square handle, big round handle)
Scissor:370 Scissor、450 Scissor、600 Scissor
Friciton Stay (two connecting, European style Friction Stay)
Product features: load-bearing 130kg, left and right interchangeable, quick installation, smooth transmission, no noise,improved the lack of the sash corner/.
Product material: zinc alloy, nylon
Reliable Product Quality
20 years experience
our prefessional is your success
The factory manufacturer supplys the product,
which can save intermediate links,and gives the maximum profit to the consumers.
Our Advantages
1. The raw materials of the castings are made of four-in-one zinc alloy, and the advanced material formula (±50 ℃) does not deform or break.
2. All stainless steel parts are made of 304 material, containing 7.5-8.5 nickel, which does not rust.
3. The plastic parts in the fitting system are made of high-strength wear-resistant nylon PA66 material, which will never be damaged.
4. The spraying part is sprayed with polyurethane material, the thickness is 45μm-100μm, and the dry adhesion is more than 10 grades, all exceeding national standards
5. The production equipment for zinc and aluminum die-casting machine is 120Ton, and the automatic punching machine is 180Ton,which ensure the hardness, strength and toughness of the casting. Inward opening, inverted, inner and outer casement windows open and close 450,000 times of opening and closing cycles, no distortion of parts, normal use
6. The surface treatment of the plated parts is a trivalent chromium electroplating process, the thickness of the plating layer is 45μm-100μm, and the salt spray test is 120 hours without pinholes, bulging and rust.
After nearly a year of repeated research and designing a mold opening test, Yuqiang Hardware has successfully improved the aluminum alloy casement window hinges, connectors, and inner opening and inverted hinge chains from the original aluminum alloy extrusion material to carbon steel. Stamping parts ensure that the load-bearing capacity of the accessories is increased. The original aluminum alloy hinges can load 70kg, and the carbon steel hinges can load up to 180kg without deformation or fracture.
It has fundamentally solved the load-bearing problem of super-standard large windows and triple-glazed windows. Now this product has been declared a national patent, leading other domestic brands.
Production Process
Buying Procedures
Q:Why choose YuQiang over any other companies?
A:We manufacture our products locally. Our customer service is exceptional and personalized for every customer. Every YuQiang product is armored and durable with a 12-month structural warranty. We use high quality materials sourced from the very best in China. Our design team works closely with customers for any custom orders.
Q:Which payment terms can we accept?
A:Normally we can work on T/T or L/C terms, sometimes DP term.
1). on T/T term, 30% advance payment is required and 70% balance shall be settled before shipment.
2). On L/C term, a 100% irrevocable L/C
Q:What logistics way for product delivery?
A:1).90% in shipment by sea, to all main continents such as South America, Middle East, Africa, Oceania and Europe, etc.
2). For neighborhood countries of China, including Russia, Mongolia, Uzbekistan etc., we can ship by road or railway.
3). For light parts in urgent need, we can deliver in international courier service, including DHL, TNT, UPS or FedEx.
Q:What are your warranty terms?
A:We provide a 12-month warranty on all our products, except failure caused by improper installation, operation or maintenance, accident, damage, misuse or non YuQiang modification and normal wear.
Q:What is your lead time?
A:We aim to provide customers with a fast lead time. We understand emergencies happen and priority production should be preferred in a faster turnaround. A stock order lead time is 3-5 working days, while custom orders within 1-2 weeks. Contact YuQiang products so we can provide an accurate lead time basing on situations.
